Header1200x385

× Welcome to the CPL Air Law question and answer forum. Please feel free to post your questions but more importantly also suggest answers for your forum colleagues. Bob himself or one of the other tutors will get to your question as soon as we can.

ADIZ

  • CANCEL SARTIME
  • Topic Author

CANCEL SARTIME created the topic: ADIZ

Good evening all,

Just completed a practice CLWA exam and I’m a bit confused on one question relating to an ADIZ.

“Any flight within an ADIZ will always be exempt from the “general requirements” for such operations if -
a) the flight does not proceed more than 5 nm of the point of departure
b) the flight originates from an aerodrome within the ADIZ
c) the true air speed is below 120 kt
d) the flight is conducted in CTA

I picked b) because it was more correct than a) when I read the bit in AIP

According to AIP ENR 1.12 paragraph 1.1.4 flights that are exempt from compliance with requirements in para 1.13 are
-a flight originating within an ADIZ which maintains a steady outbound track;
-a flight which remains within 10NM of the point of departure;
-aircraft performing published approach, holding or recovery procedures; and
-a flight conducted in accordance with special procedures arranged with the Area Air Defence Commander.

Just wondering if this is a typo or if I’m missing something here.

Cheers,
Mike

P.S Out of curiosity, I’ve never seen an ADIZ or even heard of them existing. Where are they?
#1

Please Log in or Create an account to join the conversation.

  • Posts: 2477
  • Thank you received: 266

bobtait replied the topic: ADIZ

Well, if a flight does not proceed beyond 5nm from the point of departure, it is also true that it did not proceed more than 10nm from the point of departure. Answer [a] is correct even though it does not exactly match the wording of the AIP.

Bob
#2

Please Log in or Create an account to join the conversation.

  • CANCEL SARTIME
  • Topic Author

CANCEL SARTIME replied the topic: ADIZ

Ah right, that makes perfect sense. Thanks Bob.
#3

Please Log in or Create an account to join the conversation.

Time to create page: 0.096 seconds